Vegetable Elevators Request a quote

2026-11-07

Modular plastic belt or PVC belt on a vegetable elevator

How a perforated modular belt and a PVC cleated belt differ on a vegetable elevator, and which one suits the position in the line, water, heat and cleaning.

Choose a modular plastic belt where the elevator handles water, heat or a steep transfer. Choose a PVC belt where the product is dry or lightly wet and a wide, closed trough is useful. The decision depends on where the elevator stands in the line, not on which belt is newer.

Both belts appear in the same washing and packing line. The cleated belt elevator uses a food-grade PVC or PU belt with cleats. The Z-type elevator uses a perforated modular belt.

How the two belts are built

A PVC or PU belt is a continuous sheet with cleats fixed on top. The surface is closed, so nothing passes through it, and the belt is moved by friction against the drive drum.

A modular belt is made of separate plastic modules joined by rods. Each module is a small piece of the belt. In the perforated version each module has openings. Because the belt is made of pieces, it can be shaped around sprockets and taken apart for repair.

Water

This is the clearest difference.

A closed PVC belt carries water with the product. On an incline the water runs back along the belt and collects behind the cleats. It then falls into the next machine at the top.

A perforated modular belt lets water drain through the openings as the product climbs. For this reason the elevator directly after a washer is often a modular belt machine.

Heat

The modular belt on the Z-type elevator is described as heat resistant. This matters on lines where product leaves a blancher, a cooker or a hot wash. A PVC belt is chosen for ordinary line temperatures, and hot product is a case to discuss with the supplier before the belt is specified.

Cleaning

Both belts are designed to be cleaned, in different ways.

  • PVC belt. The surface is smooth and closed, so it is easy to wipe and wash. Dirt collects behind the cleats and at the edges, and the return side needs the same attention as the carrying side.
  • Modular belt. The openings let wash water pass through, but soil and peel can lodge in them. The belt can be taken apart module by module when a section needs a deep clean, and damaged modules can be replaced one at a time.

A closed belt is quicker to wipe at the end of a dry shift. An open belt is quicker to rinse clear on a wet line. The right answer depends on what the belt carries.

Incline and transfer height

A PVC belt on a friction drive has limits on how steep it can run, because product rolls back and the belt can slip under load. The Z-type elevator is described as reaching steep transfer points that a PVC belt cannot. Its layout has a horizontal section at the bottom, a steep middle section and a horizontal section at the top.

Where a steep lift is needed in a small floor space, the modular Z layout is usually the answer. Where the lift is gentle and the trough must be wide, the PVC belt does it with simpler construction.

Repair and replacement

A damaged PVC belt is usually replaced whole or spliced. A damaged modular belt can be repaired by changing the modules that failed. For a line that cannot stop for long, this is a real difference in what a breakdown costs in time.

Drive

PVC belts rely on friction between belt and drum, so belt tension matters. Modular belts are driven by sprockets that engage the modules. The positive-drive elevator uses sprocket drive to the belt for the same reason, so that the belt carries product up the incline under control instead of depending on friction.

A simple way to decide

Ask five questions about the position of the elevator:

  1. Does the product arrive wet, and must the water leave here?
  2. Does the product or the process carry heat?
  3. How steep must the lift be?
  4. How is the machine cleaned, rinsed on the line or wiped at the end of a shift?
  5. How long can the line stop for a belt repair?

If the answers are dry, cool, gentle, wiped and flexible, a PVC belt is usually sufficient. If the answers are wet, hot, steep, rinsed and tight, a modular belt is usually right. Mixed answers call for a look at the specific line.

The guide to vegetable elevator types compares the elevator types side by side and shows where each sits in a typical washing and packing line.

Products

Elevator conveyors

Request a quote

Drawings, dimensions and quotations

The machines on this site are built by Mekatronik Makina in Kemalpaşa, İzmir, Türkiye.

Or message us directly

WhatsApp +90 507 029 83 35sales@vegetableelevators.com
Your details are used only for the quotation.