Feeders
Screw Feeder
Product loaded into the trough is passed to the next stage at a steady rate. Speed is set through the geared motor.
BodyAISI 304 stainless steel
DriveGeared motor
OperationScrew conveying inside a covered body
Power supply380 V / 50 Hz
Operation
How it works
- 01
Product is loaded into the trough.
- 02
The screw carries it along the covered body to the outlet at a steady rate.
Equipment
Standard and optional
Standard equipment
- Top covers for safety and easy cleaning
- Speed set through geared motor options
- Lockable castors
Options
- Dimensions made to suit the installation
Data
Specifications
- Body
- AISI 304 stainless steel
- Operation
- Screw conveying inside a covered body
- Drive
- Geared motor
- Rotation speed
- Set to the product through the geared motor choice
- Capacity
- Set per project
- Power supply
- 380 V / 50 Hz
- Control
- PLC or stand-alone operation
- Cleaning
- Top covers open for cleaning
In the line
Typical positions in a washing and packing line
- 01Feed hopper
- 02Cleated belt elevator
- 03Washer
- 04Z-type elevator
- 05Inspection conveyor
- 06Positive-drive elevator
- 07Packing
- 08Roller table
On this siteOther machine
Feeders
Other machines
Elevator conveyorsCleated Belt ElevatorLifts product from a low feed trough to the next machine on a PVC cleated belt. Frame and trough are AISI 304 stainless steel; the wide trough takes a heavy product flow.BodyAISI 304 stainless steelBeltFood-grade PVC / PU belt with cleatsSpecifications 
Elevator conveyorsZ-Type Modular Belt ElevatorA Z-shaped elevator with a perforated modular belt. It reaches steep transfer points that a PVC belt cannot. The belt does not hold water, takes high temperatures and is easy to clean.BodyAISI 304 stainless steelBeltPerforated modular belt (drains water, heat resistant)Specifications 
Elevator conveyorsPositive-Drive Cleated ElevatorThe belt is driven by sprockets instead of friction, so it carries product up the incline under control. Cleats and side walls keep the product on the belt.BeltCleated, with side wallsDriveSprocket drive to the beltSpecifications Contact
Drawings, dimensions and quotations
The machines on this site are built by Mekatronik Makina in Kemalpaşa, İzmir, Türkiye.